English

High Temperature Heat Shrink Tubing

High Temperature Heat Shrink Tubing is polyolefin tubing provides excellent electrical insulation, protection from dirt, dust, solvents, and foreign materials as well as providing strain relief. Use 120 to 180°F heat gun, and it is 3:1 shrink ratio, there is stick inside of the tube. The wall thickness is 2 times thick as normal shrink tubes.

Inquiry now

Description
Specifications

High Temperature Heat Shrink Tubing is made from highly flexible polyolefin tubing. Heat shrink tubing easily fits over the end of wires and connectors and shrinks down to 33% of it’s original diameter for a snug water-tight protective seal without a reduction in tube length.

High-temperature heat shrink helps to improve the efficiency of heat shield sleeve insulation and helps protect wire loom, lines, cables, and hoses.

Very flexible polyolefin tubing
Seals ends of heat sleeve for maximum efficiency
Has a 3:1 shrink ratio
Offers clean professional look
Flame retardant
Alternate to plastic ties & tape
Use to insulate wires, connections, terminals, wire splicing & more
Thick wall construction & remains flexible
Operating temp range: -67°F to 275°F
Max Operating temp: 394°F for short duration (30 to 60 mins)
Easy to install: Apply at 120 to 180°F using heat gun

Part Number	Description
620108	1/8" ID
620104	1/4" ID
620308	3/8" ID
620102	1/2" ID
621116	11/16" ID
621000	1" ID
622000	2" ID
623000	3" ID

Send A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Tags :

Categories

New Products

Related products

Heat Shield Sleeve with Hook and Loop Seam

Heat Shroud Aluminized Sleeving with Hook and Loop Closure

Heat Shroud Aluminized Sleeving with Hook and Loop Closure capable of reflecting up to 90% of radiant heat, this removable aluminized sleeve is great for protection without component disassembly.

LIGHTWEIGHT REFLECTIVE HEAT BARRIER THERMAFLECT SLEEVE

Thermal Shield Heat Sheath Aluminized Sleeving

Thermal Shield Heat Sheath Aluminized Sleeving is made by fiberglass and aluminum, then use aramid thread or fiberglass thread sewn into a sleeve. It can withstands 1,100 degrees F of continuous radiant heat and 500 degrees F direct heat. Used to protect fuel lines, wiring looms, air intake, intercooler pipes and air conditioner hoses.

Heat Resistant Silicone Fiberglass Fire Shield Sleeve

Heat Resistant Silicone Fiberglass Fire Shield Sleeve is made by E-glass fiber braided and coated heavy duty pure silicone rubber. This rugged silicone coating makes the fire sleeve resistant to most chemicals, including hydraulic fluids, oils and fuels. The coating also makes it resistant to abrasion and fraying. Used to protect brake lines, fuel lines, wiring harnesses and cables.

Fire Wrap 3000 Hose Wire Heat Protection Silicone Coated Heat Sleeve

Fire Wrap 3000 Hose Wire Heat Protection Silicone Coated Heat Sleeve is made by E-glass fiber braided and coated heavy duty pure silicone rubber, then sewn with hook & loop closure. This rugged silicone coating makes the fire sleeve resistant to most chemicals, including hydraulic fluids, oils and fuels. The coating also makes it resistant to abrasion and fraying.

Thermal Shield Gold Heat Sheath Aluminium Protective Sleeving

Thermal Shield Gold Heat Sheath Aluminium Protective Sleeving made by gold fireproof aluminum metalized Polyimide lamination and fiberglass. Used to protect fuel lines, wiring looms, air intake, intercooler pipes and air conditioner hoses.

Gold Heat Shroud Aluminum Reflective Shielding Sleeve

Gold Heat Shroud Aluminum Reflective Shielding Sleeve is made from a high temperature rated glass fiber fabric with an gold aluminized outer facing. The hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

High Temperature Thermal Shield Titanium Heat Sleeve

High Temperature Thermal Shield Titanium Heat Sleeve made by pure lava rock fiber, it is vocanic rock fiber, resistant very high temperature. Used to protect street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat.

Fuel Brake Line Hose Protective Aluminum Heat Shield Sleeve

Fuel Brake Line Hose Protective Aluminum Heat Shield Sleeve is made by braided fiberglass sleeve with aluminum foil cover. It can withstands 1,100 degrees F of continuous radiant heat and 500 degrees F direct heat.

Subscribe To Our Newsletter