High Temperature Protection Products News from BSTFLEX Ningguo BST Thermal Products Co.,Ltd.

Oct 18, 2026 Silicone Exhaust Wrap: Thickness, Overlap and End Finishing
The finish of an exhaust lagging installation is determined at the bends, overlaps and cut ends, not only along the straight pipe. These are the details to inspect when selecting silicone exhaust wrap for a diesel engine, generator or approved marine dry exhaust installation. BSTFLEX Silicone Exhaus...
View More
Oct 18, 2026 Inconel Heat Shield Foil vs Insulated Panels: What Are You Actually Ordering?
An inquiry for an “Inconel heat shield” can describe several products that are not equivalent. One supplier may quote a flat Alloy 625 sheet. Another may provide an embossed facing ready for forming. A third may build a complete insulated panel with an Alloy 625 hot face, an insulation core and a se...
View More
Oct 17, 2026 Silicone Coated Turbo Blankets: Outer-Cover Temperature vs Turbine-Side Insulation
A silicone coated turbo blanket is a multilayer thermal component. The visible silicone-coated fiberglass fabric is only the outer cover. It should not be treated as the hot-face insulation, the insulation core, or the temperature rating of the complete blanket. This distinction matters when buyers ...
View More
Oct 17, 2026 Fiberglass Muffler Packing Mat: Thickness, Areal Weight and Cut Pattern
Fiberglass muffler packing mat should be purchased by more than thickness alone. For repeat exhaust silencer production, the buyer also needs to define material construction, mass per unit area, cut dimensions, installed quantity and the way each piece fits around the perforated core. A 10 mm mat fr...
View More
Oct 16, 2026 Diesel Heater Exhaust Insulation Temperature Rating: Material Limits vs Surface Temperature
.bst-heater-exhaust-rating{font-family:Arial,Helvetica,sans-serif;color:#262626;line-height:1.75;max-width:1180px;margin:0 auto;padding:18px;overflow-wrap:break-word;} .bst-heater-exhaust-rating *{box-sizing:border-box;} .bst-heater-exhaust-rating h2{font-size:24px;line-height:1.35;margin:32px 0 14p...
View More
Oct 14, 2026 Basalt Loose Fill vs Basalt Packing Mat for Repeat Silencer Assembly
Basalt loose fill and basalt packing mat put different preparation tasks on the silencer assembly line. With loose fill, the assembler measures and distributes a fiber charge. With a mat, the assembler works from a defined cut piece and positions its edges, layers and overlap. Both routes need an ap...
View More
Oct 14, 2026 Stainless Steel Heat Shield Foil Fabrication: Cutting, Bending and Edge Finishing
A stainless steel heat shield blank can match its flat drawing and still need rework after forming. A flange may sit too high, a hole may miss its bracket, or an unfinished edge may face the wiring the shield is supposed to protect. These problems belong in the fabrication plan, before the first pro...
View More
Oct 14, 2026 Automotive Hose and Fluid Line Heat Protection Sleeves: Selection, Sizing and OEM Applications
Automotive hoses and fluid lines are frequently routed through areas affected by exhaust manifolds, turbochargers, catalytic converters, EGR systems, transmissions and other concentrated heat sources. Even when a hose does not touch the hot component, radiant heat can increase the temperature of the...
View More
Oct 12, 2026 How to Protect Automotive Wiring Near Exhaust Manifolds and Turbochargers
Automotive wiring routed near an exhaust manifold, turbocharger, downpipe or catalytic converter can be exposed to concentrated radiant heat even when the harness never touches the hot component. Over time, excessive thermal exposure can affect cable insulation, harness tape, protective conduit, con...
View More
Oct 12, 2026 Custom Die-Cut Heat Shields: Drawings, Tolerances and OEM Supply
Custom die-cut heat shields are reflective sheets or insulating composites cut to a defined outline, with the holes, slots and openings needed for a particular assembly. Instead of receiving a rectangular sheet to trim on the production line, the buyer specifies a finished part that can be checked a...
View More
Oct 12, 2026 Ceramic Wool for Exhaust Silencers: Grade, Handling Data and OEM Specification
Ceramic wool for exhaust silencers should be purchased against an identified fiber grade and an approved packing arrangement, not simply a higher temperature number. A ceramic sheet that matches the dimensions of an existing fiberglass piece is not automatically an equivalent replacement. For an OEM...
View More
Oct 10, 2026 Gold Heat Shield vs Aluminum Heat Shield: Which Reflective Sheet Should You Choose?
Gold is not automatically better than aluminum for a reflective heat shield. The useful comparison is between two complete constructions installed in the same thermal environment: reflective facing, reinforcement, adhesive and finished coverage. A gold appearance does not establish a higher operatin...
View More

1 2 3 ... 36

A total of 36pages

Categories

New Products