BSTFLEX makes different materials thermal and heat shield sleeve and used to protect your wires, cables, hoses, and fluid lines from the high temperatures.
Fuel Brake Line Hose Protective Aluminum Heat Shield Sleeve is made by braided fiberglass sleeve with aluminum foil cover. It can withstands 1,100 degrees F of continuous radiant heat and 500 degrees F direct heat.
High Temperature Thermal Shield Titanium Heat Sleeve made by pure lava rock fiber, it is vocanic rock fiber, resistant very high temperature. Used to protect street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat.
Gold Heat Shroud Aluminum Reflective Shielding Sleeve is made from a high temperature rated glass fiber fabric with an gold aluminized outer facing. The hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close ed1
Thermal Shield Gold Heat Sheath Aluminium Protective Sleeving made by gold fireproof aluminum metalized Polyimide lamination and fiberglass. Used to protect fuel lines, wiring looms, air intake, intercooler pipes and air conditioner hoses.
Fire Wrap 3000 Hose Wire Heat Protection Silicone Coated Heat Sleeve is made by E-glass fiber braided and coated heavy duty pure silicone rubber, then sewn with hook & loop closure. This rugged silicone coating makes the fire sleeve resistant to most chemicals, including hydraulic fluids, oils and fuels. The coating also makes it resistant to a1
Heat Resistant Silicone Fiberglass Fire Shield Sleeve is made by E-glass fiber braided and coated heavy duty pure silicone rubber. This rugged silicone coating makes the fire sleeve resistant to most chemicals, including hydraulic fluids, oils and fuels. The coating also makes it resistant to abrasion and fraying. Used to protect brake lines, fuel 1
Thermal Shield Heat Sheath Aluminized Sleeving is made by fiberglass and aluminum, then use aramid thread or fiberglass thread sewn into a sleeve. It can withstands 1,100 degrees F of continuous radiant heat and 500 degrees F direct heat. Used to protect fuel lines, wiring looms, air intake, intercooler pipes and air conditioner hoses.
Heat Shroud Aluminized Sleeving with Hook and Loop Closure capable of reflecting up to 90% of radiant heat, this removable aluminized sleeve is great for protection without component disassembly.